|
|
| |
 |
|
| |
| Typical costs: | - Wedding bands, on the low end, might cost $100 or less, each for simple sterling silver or narrow gold rings, such as the textured silver "Chic and Groovy" ring from Novica.com or the "gold classic comfort fit wedding band" from Diamond.com.
- In the mid-range, 14K or 18K gold bands or titanium with milgrain edges or carving might cost $150 to $500, depending on the width. Examples include the 14K Yellow Gold Inset Milgrain ring or the channel-set twisted rope yellow gold ring, both from Weddingbands.com.
- A very wide platinum band for a man, such as the "Low Dome Comfort Fit Band" from BlueNile.com, or a diamond band for a woman, such as the "Etoile Band Ring" from Tiffany & Co., might cost $1,500 to $2,000 or more.
- The cost will depend on how much metal is used and which type, the intricacy of the design and whether the ring contains stones, and what kind. Also, designer rings, such as those from Alex Sepkus, can run above $2,000, after you add the cost of the stone.
- HK Jewelry Design provides a guide to choosing metals and stones for wedding rings.
|
| What should be included: | - Most wedding bands include free sizing, in which the jeweler makes the ring a few sizes larger or smaller by cutting and soldering the metal, or adding extra metal. You should not be able to tell that the ring was altered.
- Some jewelers and online stores, such as DeBebians.com, sell matching his-and-her ring sets.
|
| Additional costs: | - If your wedding bands are valuable, especially if they contain diamonds or other precious stones, you might want to have them independently appraised and insured. At the very least, check to see if coverage is included in your homeowner's insurance policy or if you can get it added through a rider.
|
| |
| Shopping for wedding rings: | |
| |
Article updated March 2007 |
|
|
Digg this
del.icio.us
E-mail
Post