|
|
|
 |
 |
| |
| Typical costs: | - Range from less than $1/square foot for do-it-yourself panels from a building supply store to $2-$7 or more if installed by a contractor. For an 1,800-square-foot exterior (50' long, 40' wide and 10' tall'), that's $3,600 to $12,600 and up for professionally hung vinyl. Quality, thickness and insulation all matter, and the cheapest bid is not always best.
- Estimates are based on the exterior square feet of your home. For example, if your home was 10' tall, 40' long and 30' wide, it could be a 1,200 square foot home with 10*(40+40+30+30)=1,400 exterior square feet, which could take roughly 14 10'x10' squares of vinyl.
What should be included: | - Vinyl siding ranges from .035 to .055 inches thick, with most premium brands at .040 to .048 inches. Some have a layer of insulation. Thinner siding may sag, crack when hit or tear loose in high winds. Read the warranty to figure out how a product will do in local weather.
- Color is added during manufacture; vinyl doesn't need painting but should be washed periodically. Since dark colors absorb heat, vinyl siding usually comes in lighter tones.
- Proper installation is crucial and there are brand-specific instructions, which may be beyond a home handyman's skills. This Old House and Fine Homebuilding Magazine give overviews.
- Tip: On an older home, check for zoning restrictions against covering historic or architectural details.
- Some people have environmental concerns about polyvinyl chloride plastic resin; Architecture.About.com gives pros and cons.
Additional costs: | - Trim, crown moldings, corner boards and soffits (covering the gap between the house and gutters) add to the bottom line and should be clearly included in any estimate.
- If you already have siding, it will need to be removed, which can cost $1,000-$3,000 to remove.
Shopping for vinyl siding: | - Two of the top manufacturers are CertainTeed and Crane. The Crane Website can help you locate a contractor near you who can install their siding.
- Ask if a contractor is certified by a particular manufacturer or by the Vinyl Siding Institute; and if the company is licensed, bonded and its staff insured. Check with the Better Business Bureau to see if any complaints have been filed.
- Tip: Find vinyl siding projects in your area. After the job is done, knock on the door, compliment the homeowners and ask how the process went and the names of the contractor and manufacturer.
- The written contract should include a final price for the whole project, materials to be used, dates within which the project will be done and the manufacturer's warranty.
|
| |
Article updated November 2006 |
|
|
|
Recent Posts |
| Amount: $22,672.00 |
Estimate of vinyl Siding
|
| Posted by: Jenn5204 in maumelle, AR. | Purchased: February, 2008 |
| Sq Ft of Home: 1600 | Sq ft of siding: 2400 |
| Brand: Norandex | Installer: Wilsons |
| I got a quote to have vinyl siding installed along with gutters/15 seabrooke windows. The quote we received for this is 22,672 . Does this seem like a fair price? |
|
|
| Amount: $22,672.00 |
That seems too high to me.
|
| Posted by: - Jim in Lackawanna, NY. | Purchased: 2008 |
| Sq Ft of Home: 1600 | Sq ft of siding: 2400 |
| Brand: Whatever | Installer: Whoever |
| I'm not Bob Vila, but that number seems really high to me...$22,000 for VINYL siding? |
|
|
| Amount: $22,672.00 |
siding
|
| Posted by: Tom in West Hartford, CT. | Purchased: 2008 |
| Sq Ft of Home: 1600 | Sq ft of siding: 2400 |
| Brand: whatever | Installer: whoever |
| I haven’t sided a house myself in a while. But back in the 80's and through the beginning of the 90's a small contractor could figure $100 a square for materials and $100- 150 for profit. I have seen those numbers double due to the cost increases in material and labor but $940 per square does seem high - even with gutters. I look for numbers somewhere around $450 a square on the low side and $650 a square on the high side depending on the size and complexity of the job (more then one story – staging setup and moving around- trim detail)and overhead of the contractor. |
|
|
| Posted by: Carl Miller in Tacoma, WA. | Purchased: April, 2008 |
| Sq Ft of Home: 3500 | Sq ft of siding: up to 3500 |
| Brand: many | Installer: contractor |
| Some materials which look a lot like vinyl siding are no longer classified as vinyl. Prices can vary by a factor of five to one. A cheap Alcoa panel compared to a Crane or Nailite shingle pattern. Cranes portfolio cost three times what a Reynolds builder panel cost and is worth every penny of it. Check warranty before you buy any siding. Look at exclusions. Many exclude damage from sunlight and extremes of temperature. Installation cost vary by state. By brother pays his men in Ill. 45% less than we pay on West Coast. |
|
|
| Amount: $18,679.00 |
Vinyl Siding Estimate
|
| Posted by: Jamel in Willingboro, NJ. | Purchased: 2008 |
| Sq Ft of Home: 1200 | Sq ft of siding: 800 |
| Brand: many | Installer: contractor |
| I rec'd a few estimates for vinyl siding. They seem to be all over the place...the low end at about $7500, the high end $18679. I have a ranch style home, but my entire house is not vinyl, I also have some parts brick. My quote was to remove the current vinyl, put up gutters, replace the soffits, facsia (sp*). It just seems like a very hig price. |
|
|
| Amount: $14,382.00 |
vinyl estimate
|
| Posted by: rosa in rochester, MN. | Purchased: 2008 |
| Brand: Vinyl | Installer: contractor |
| i had my estimat for vinyl siding the other day and the price came up to 14,382. It include the comemrical jobs, taxes, permit, haulaway, materials and installation. This price seems high for me and i'm not sure what the average price is. Do you all think this is a good deal or no? |
|
|
| Amount: $22,672.00 |
Jenn5204 in maumelle, AR.
|
| Posted by: John in Phila, PA. | Purchased: 2008 |
| Sq Ft of Home: 1600 | Sq ft of siding: 2400 |
| Brand: norandex | Installer: wilsons |
That quote of 22,672 was for 24 sq of siding,soffit,fascia and gutters. It also included for those of you who just look at price fifteen replacement windows. If you break it down 15 windows @400.00 = 6000.00
22672.-6000.= 16672/24sq=695.per square for norandex siding if polar wall or generations series siding in a one step (laminated insulation) process its a fair price |
|
|
| Amount: $10,309.00 |
Insulated vinyl siding
|
| Posted by: Jason Froese in Burrton, KS. | Purchased: June, 2008 |
| Sq Ft of Home: | Sq ft of siding: 2400 |
| Brand: Heartland Siding/ CedarMax | Installer: Super Siding |
| $10309 for 24 sq of siding, this includes tear off of old pine lap, trim coil over brick ledge, house rap all exterior walls, 1/4" fan-fold insulation, and install new CedarMax Insulated Vinyl. Price includes all material, Labor, fees, and applicable taxes |
|
|
| Amount: $0.00 |
$14,725 estimate
|
| Posted by: Suzanne in Orem, UT. | Purchased: 2008 |
| Sq Ft of Home: 2800 | Sq ft of siding: 1900 |
| Brand: American Exteriors | Installer: American Exteriors |
| I looks like from other comments that this bid is not out of line but according you the websites estimation it is. This company claims it has a life time warranty. It just still seems like a lot of money. We trying to decide if we should just repaint our metal siding or bite the bullet and get the vinyl siding. |
|
|
| Amount: $14,300.00 |
viynl siding estimate
|
| Posted by: Sean from Ridge in Ridge, NY. | Purchased: 2008 |
| Sq Ft of Home: | Sq ft of siding: 1940 |
| I had an estimate of 14,300.00 on a two story ranch for new soffitts, coil stock fascia 1/2" fan fold, new gutters, cedar impressions on the front and 4" dutch lap on the sides and back. The sider is a neighbor I see all the time, we are friendly |
|
|
| Amount: $12,500.00 |
Vinyl Siding
|
| Posted by: R Day in wilmington, DE. | Purchased: 2008 |
| Sq Ft of Home: 1800 | Sq ft of siding: 753 |
| Brand: ComfortCore | Installer: JP Fitzpatrick |
| Estimate is for siding and wrapping of windows. Also, for soffit & Facia. Seems high to me. |
|
|
| Posted by: ahme in Greenville, SC. | Purchased: 2008 |
| Sq Ft of Home: | Sq ft of siding: 2000 |
| Brand: Noradex | Installer: Home Depot |
includes siding, soffits, and facia
$8000 for 14 windows |
|
|
| Amount: $0.00 |
vinyl siding
|
| Posted by: jayboy in bristol, CT. | Purchased: 2008 |
| Sq Ft of Home: 1400 | Sq ft of siding: 14 sq |
| Brand: | Installer: myself |
| im a sub contractos and i was pd $1,560 to rip old ceder shakes, insullate foam , and side 14 sq did i get a good deal? |
|
|
| Amount: $9,900.00 |
Estimate
|
| Posted by: C in Chicago, IL. | Purchased: 2008 |
| Sq Ft of Home: | Sq ft of siding: 1500 |
| Brand: | Installer: Feldco |
| I recently received a quote for a 1 story 1500 sq ft home for vinyl siding no gutters or soffit @ $9,900. I know i can find cheaper but winter is here and budget turned tighter, so will have to wait. Good luck to all, and i hope my estimate helps you search for a better one for yourself. |
|
|
| Amount: $10,000.00 |
vinyl siding .055 thick with insulation
|
| Posted by: Tom Hansen in Elmo, UT. | Purchased: November, 2008 |
| Sq Ft of Home: | Sq ft of siding: 1500 |
| Brand: alcoa | Installer: contractor |
| I received this quote. The materials are top of the line and the thickness is the thickest double nailed, insulation and installation w/ soffits and fascia. |
|
|
| Amount: $18,000.00 |
siding
|
| Posted by: A user in NY in New York, NY. | Purchased: November, 2008 |
| Sq Ft of Home: | Sq ft of siding: 2000 |
| Brand: | Installer: Sears |
| I just got a quote today for $18,000 for a 2000 sqft of siding from sears. I plan on getting more quotes but this was from sears with no payments for 12 months. |
|
|
| Amount: $0.00 |
Siding estimates
|
| Posted by: Billy O in Harrisburg, NC. | Purchased: 2008 |
| Sq Ft of Home: 2400 | Sq ft of siding: 2200 |
| Brand: Certainteed | Installer: ME |
| My secondary job is siding. In North Carolina, I typically charge about $350 for 100 sq ft. And I will use any material less than an .042 thickness. I do great work and make money. Hope this helps |
|
|
| Amount: $0.00 |
What might labor costs be??
|
| Posted by: Joseph in Chicagoland in Chicago, IL. | Purchased: January, 2009 |
| Sq Ft of Home: 1000 | Sq ft of siding: 850 |
| Brand: | Installer: ? |
If I buy materials how much might an installer charge to take down old and put up new siding? Not looking for an exact number just a ball park figure.
thanks,
joe |
|
|
| Amount: $0.00 |
about pricing
|
| Posted by: Ron D. in metarie, LA. | Purchased: 2004 |
| Sq Ft of Home: Almost any | Sq ft of siding: Almost any |
| Brand: Dont remember | Installer: Myself and crew |
| I used to be a subcontractor in Metarie,LA 5 yrs ago , in my exp back then we charged $80- $120+ per sqaure just for labor , and $6- $10 labor per linear ft. of sophit and fascia , Now add overhead and cost of materials + recent inflation flucuations , and siding price difference per state and that would be about what you want your total cost to be , anything else being extra , hope this helps |
|
|
| Amount: $27,000.00 |
Estimate for Siding
|
| Posted by: John F in Carroll, OH. | Purchased: March, 2009 |
| Sq Ft of Home: 2400 | Sq ft of siding: 3700 |
| Brand: Royal | Installer: estimate received |
| I requested an estimate to have some reside our house. The estimator said it would take 37 squares. The job also includes sofit, removing two doors and replace them with windows. I wanted 1/2 plywood added along with tyvek. His estimate was just under $27K |
|
|
| Amount: $0.00 |
vinyl siding sq ft chargescharges
|
| Posted by: glenn in memphis, TN. | Purchased: 2009 |
| when you say sq ft price ,do you mean floor sq footage or actual sq footage of the siding itself? |
|
|
| Amount: $18,040.00 |
Cost of Vinyl Siding
|
| Posted by: Mark in Mass in Berlin, MA. | Purchased: April, 2009 |
| Sq Ft of Home: | Sq ft of siding: 2400 |
| Brand: Certainteed | Installer: Professional |
| We got a quote for vinyl siding our home with stripping of existing vinyl, PVC Window Trimming with built in JChannel, 6" vinyl corners, A new gutter one side only. The cost was 18K installed. Does this seem reasonable |
|
|
| Amount: $7,480.00 |
Vinyl Siding/Seamless Gutters
|
| Posted by: EJ in Natick, MA. | Purchased: April, 2009 |
| Brand: Certainteed | Installer: |
| I just accepted a contract for $7500 for removal and cleanup of old siding. Added insulation on exterior, vinyl siding and all the extras need plus seamless gutters. I got two quotes similar and many $10,000 and up! Its worth it to get as many estimates as possible! |
|
|
| Amount: $0.00 |
square ft or square yard
|
| Posted by: rachel in Berlin, CT. | Purchased: April, 2009 |
| Sq Ft of Home: 1642 | Sq ft of siding: 900 |
| Brand: Crane | Installer: Contractor |
| Do they sell siding in sq feet or yards. How much is it a square. I have had estimates for 15000-22000..Most recently had one for 9912 for siding and replacement of gutters...is this normal. I have one more person to come and give me a quote and then we'll see |
|
|
| Amount: $18,000.00 |
Vinyl Siding + New Gutter Guard
|
| Posted by: Ann in Greensboro, NC in Greensboro, NC. | Purchased: 2009 |
| Sq Ft of Home: 3000 | Sq ft of siding: |
| Brand: ? | Installer: Contractor |
| I have had several quotes for siding and all are different. $18,000, $25,000 and $28,000. I do not know the exact sq ft. of the exterior. I have a 2 story house with a finished 3rd floor/attic. The interior sq. ft is 3,000. Is this a good price? |
|
|
| Posted by: Buzz in VA BEACH, VA. | Purchased: August, 2001 |
| Sq Ft of Home: 1800 | Sq ft of siding: 34 |
| Brand: PREMIUM | Installer: PARAMOUNT BUILDERS |
| RECIEVED A QUOTE OF 49,000.00 BUT AFTER SEVERAL DISCOUNTS THE TOTAL WOULD BE 29,000.00. FIRST I DON'T UNDERSTAND HOW AN 1800 SQ FT HOME NEEDS 3400 SQ FT OF SIDING.DOES THIS SEEM REASONABLE. |
|
|
| Amount: $15,080.00 |
Siding
|
| Posted by: sidingguru101 in Saint Joseph, MI. | Purchased: December, 2008 |
| Sq Ft of Home: 1200 | Sq ft of siding: 2000 |
| Brand: certainteed | Installer: |
Hey people listen up.
If you want cheap prices expect the following things to happen.
1. Cheap materials means you will replace them in the near future.
2. A company that goes out of business because they don\'t have a profit.
3. A project which isn\'t finished because the contractor runs out of money.
4. A poor looking job because the contractor can\'t afford the proper tools or sharp blades for old saws.
5. A project which takes a lot longer than it is supposed to because they can\'t figure out a problem or they are skipping from job to job to find money to survive.
6. Workers who smoke, leave cigarette butts in your yard, show their fat bellies, steal your beer, and leave oil stains on your driveway.
I have more of these examples, but I hope you now get the point.
DON\'T BUY THE CHEAP BID IT WILL COST YOU MORE IN THE END.
QUALITY CONTRACTORS HAVE REAL EXPENSES, RESPECT THEM AND THEIR PRICE, IT IS THAT WAY FOR A REASON |
|
|
| Amount: $20,000.00 |
Siding
|
| Posted by: Tom Smith in Union, NJ. | Purchased: June, 2009 |
| Sq Ft of Home: 1800 | Sq ft of siding: 2200 |
| Brand: Cedar Ridge | Installer: Total Remodeling |
| Quoted 20,000 to attach Cedar Ridge Vinyl Siding onto Wood Shingles. New Soffit, Shutters and Capping as well as new Gutter matching color. |
|
|
| Posted by: frustrated homeowner in Kings Mountain, NC. | Purchased: August, 2009 |
| Sq Ft of Home: 1,800 | Sq ft of siding: 150.7 |
| Brand: Mastic | Installer: |
| We recieved some damage from a hail storm and needed only a little over 150 sq ft of siding replaced,a decorative gable vent and 8" of aluminum fascia. The insurace gave us $616.91 w/depr to cover the job. You can imagine how upset I was when the job was almost $1,000.00 over. I would love to know if anyone can tell me who took me to the cleaners my insurance or my contractor. |
|
|
| Amount: $1,600.00 |
Frustrated Homeowner
|
| Posted by: Johnson in Kings Mountain, NC. | Purchased: August, 2009 |
| Sq Ft of Home: 1800 | Sq ft of siding: 150.7 |
| Brand: Mastic | Installer: |
| That price seems very reasonable. Sounds like the insurance company jipped you. |
|
|
| Posted by: Help! in newington, CT. | Purchased: October, 2009 |
| Sq Ft of Home: 1200 | Sq ft of siding: 1460 |
| Brand: envirowall | Installer: tri state |
| Help! My house is a raised ranch that is 48X25. We will get new gutters, sofifts, casings, moulding around the door, and an envirowall product that gives a $1500 tax rebate. the product is energy rated and environmentally friendly. Is this too much for this size house? The product looks superior to regular vinyl siding and has a double lifetime gaurentee on the product and labor. Is this a crazy amount of money? |
|
|
| Amount: $1,600.00 |
Kings Mountain, NC
|
| Posted by: JoshHagan in Alliance, OH. | Purchased: 2009 |
| Complain to the insurance company. That\'s what my dad did when they tried to pay him a depreciated price for shingles that had hail damage. They are ripping you off for sure. Tell them if they don\'t pay you\'ll call your lawyer. You pay the same amount of insurance on new or older shingles so they should pay you the full amount. If they are paying you the depreciated value ask them why the cost of insurance doesn\'t get lower as your shingles get older since they will be paying out less. It\'s an insurance company con. Tell them to pay up or you will sue. |
|
|
| Amount: $0.00 |
vinyl siding
|
| Posted by: S. Higgins in High Point, NC. | Purchased: November, 2009 |
| Sq Ft of Home: any | Sq ft of siding: any |
| Brand: any | Installer: Square One, High Point |
| I have never seen so many outrageous quotes per sq ftage, in my life!! Yes, it may differ some per product and region of the country but most of the people that I have read so far will really be taken to the cleaners if they fall for these quotes. My partner and I install siding, etc in the Greensboro, NC area and charge $200-300 per square for materials and labor, or more if product is more. These outrageous quotes are also calling for way too much siding and if the customer doesn't know any better they will get ripped off, because they are overcharging you for materials. To the siding guru in OH, just because the price is reasonable and the installers are honest about it, doesn't mean you end up with all that negative stuff you mentioned. We are honest and fair and just trying to make a living but the greedy contractors and dishonest and sloppy installers make it hard on all of us.To the people in Kings Mtn, NC, the quote you got of $1000 was a bit higher than it needed to be. I think the insurance money would have covered it. Ann in Greensboro, contact us and we'll give you a fair and honest quote. sq.1@live.com |
|
|
| Amount: $0.00 |
S. Higgins in High Point, NC
|
| Posted by: Straley Construction, Inc in Chicago, IL. | Purchased: November, 2009 |
You sir are a con. There is no way you can say the insurance estimate project was high at $1ooo. You never saw the job. I do insurance work and they will give the least amount possible to do the job.
How do you know how much siding is needed on a house you have never seen? You do realize the amount of siding in the quote usually has 10% waste on it, don't you?
Do you think the cost of doing business in Chicago is the same as NC? What are your comp rates? Are you and your partner insured?
Bad mouthing people when you don't have details is really low class. |
|
|
| Amount: $12,460.00 |
Siding
|
| Posted by: jphilplus3 in montgomery, AL. | Purchased: December, 2009 |
| Sq Ft of Home: 1500 | Sq ft of siding: |
| Brand: Crane Board- Alligator siding | Installer: Jones bro. |
|
|
| Amount: $6,750.00 |
Vinyl Siding
|
| Posted by: Joe Attica in Rensselaer, IN. | Purchased: February, 2010 |
| Sq Ft of Home: | Sq ft of siding: 1400 |
| Brand: variform | Installer: A+ Affordable |
Really Nice guys also
here is there number (219)242-5875 |
|
|
| Amount: $19,800.00 |
Fair price?
|
| Posted by: Jessica Rau in Glenrock, WY. | Purchased: March, 2010 |
| Sq Ft of Home: 1782 | Sq ft of siding: 2200 |
| Brand: Norandex | Installer: Precision Siding |
| This is a Polar Wall Plus exterior system. It includes siding with bonded insulation, sill channel, trim, soffit fascia over all wood overhangs, shutter, wrapping all door and window trim, louvers and seamless gutters. All with lifetime warranty! Does this seem like a fair price? |
|
|
| Amount: $0.00 |
Vinyl Siding Estimate
|
| Posted by: David Carroll in Winthrop, MA. | Purchased: 2010 |
| Sq Ft of Home: 1800 | Sq ft of siding: 3000 |
| Brand: | Installer: NewPro |
| I got an estimate of $36,000 for 30 squares of NewPro's premium insulated siding with seamless gutter, 34 linear ft. of freeze, 156 linear ft. of soffit. This included stripping the existing aluminum and wood down to the sheathing. Looks like good quality stuff but the price is more than double what I expect, am I incorrect? |
|
|
| Amount: $23,714.00 |
Siding Price Fair
|
| Posted by: Dave4 in Glenmoore, PA. | Purchased: April, 2010 |
| Sq Ft of Home: 2400 | Sq ft of siding: don\'t recall |
| Brand: Prodigy | Installer: Appleby Systems, Inc |
| 50 year waranty through Appleby. I know they ar emore expensive but isthis toohigh? It started out at 41K, we got a five star discount although we are not previous customers so after all of the discounts and called to the company president, we get this great deal. Just not sure if it is. |
|
|
| Amount: $26,700.00 |
Siding Replacement
|
| Posted by: EdithC in Staten Island, NY. | Purchased: April, 2010 |
| Sq Ft of Home: 2800 | Sq ft of siding: 3600 |
| Brand: Crane | Installer: Power Windows and Siding |
| Job was to remove old Aluminum Siding, Re-side house in solid core Vinyl Siding, sofitt, Alum clad leaders and gutters, appy alum trim around existing windows (25 windows). Original quote was extremely high 52K then reduced to 35k. Sign on the spot reduced the price to $26,600. Was this a final fair price for Staten Island NY location. Home is 48 by 27 feet 2 story high ranch type home. PWS seems to have padded extra sq feet needed for job. |
|
|
| Amount: $5,000.00 |
Do it yourself. Very easy
|
| Posted by: Fred whitback in Franklin TWP, NJ. | Purchased: April, 2010 |
| Sq Ft of Home: 2200 | Sq ft of siding: 3000 |
| Brand: certainteed | Installer: |
| I installed the siding with a few friends. I rented a few pieces of equipment and did a much better job than any greedy contractor would do. I had a few contractors give quotes I didn't know they paid their guys $300. an hour. |
|
|
| Amount: $7,500.00 |
EJ of Natick, MA
|
| Posted by: betsy in natick, MA. | Purchased: 2010 |
| I'd like to know who your installer was. That is a very reasonable price. |
|
|
| Amount: $0.00 |
SIDING REPLACEMENT
|
| Posted by: Worried in Waldorf in waldorf, MD. | Purchased: 2010 |
| Sq Ft of Home: 2420 | Sq ft of siding: 2400 |
| Brand: NAPCO,SPLENDORXL | Installer: AMERITECH |
| Met with the salesperson. Demonstrated what appears to be excellent products and installation, which includes high end vinyl, greenguard raindrop moisture barrier, foam backing, trim, soffitts, gutters, tear off and removal. The price offered after discounts is $48,545 for approx. 2400 sq ft. Agreeing that this may be premium service, it still sounds high to me. Thoughts? |
|
|
| Amount: $14,441.00 |
Vinyl Siding
|
| Posted by: Retiree in Birmingham, AL. | Purchased: 2010 |
| Sq Ft of Home: 1400 | Sq ft of siding: 1700 |
| Brand: | Installer: Contractor |
| Estimated price includes material and labor. In addition to siding, price includes 235 linear feet of soffit, 2 new gable vents, and build outs for 13 windows. Contractor to cover old existing Masonite siding with styrofoam insulation before installing vinyl siding. How does this estimate compare? |
|
|
| Amount: $16,078.00 |
Mean Price of Vinyl Siding
|
| Posted by: Contractor Advice in Lakesite, TN. | Purchased: July, 2010 |
| Sq Ft of Home: TBD | Sq ft of siding: 2000 |
| Brand: Vinyl | Installer: Contactor Advice |
| Based on all the post listed, the calculated mean pricing for vinyl siding should run approximately $8.04 per square foot for labor and material with a reputable contractor. Some areas of the country will be less, and some areas might be more. Make sure your contractor is licensed, insured, and possible bonded. Check their references and ask to see pictures of past work and call past clients to get some feedback. Don't always go with the low-ball contractor because they might not be reputable. As a client, you must perform you do diligence in selecting the right contractor. A good contractor will provide you with as much information as you request so DON'T BE AFRAID TO ASK for as much information as you need to make you feel comfortable that you are getting the best deal for your money while also receiving a good service. After all....you home is most of our largest investments in a lifetime, so you need to protect your investment. Good luck to you all!!! |
|
|
|
|
Post About Your Experience With Vinyl Siding |
| |
|
|
|
|
|
Digg this
del.icio.us
E-mail
Post